flacenc
flacenc encodes FLAC streams. FLAC is a Free Lossless Audio Codec. FLAC audio can directly be written into a file, or embedded into containers such as oggmux or matroskamux.
Example launch line
gst-launch-1.0 audiotestsrc num-buffers=100 ! flacenc ! filesink location=beep.flac
Encode a short sine wave into FLAC
gst-launch-1.0 cdparanoiasrc mode=continuous ! queue ! audioconvert ! flacenc ! filesink location=cd.flac
Rip a whole audio CD into a single FLAC file, with the track table saved as a CUE sheet inside the FLAC file
gst-launch-1.0 cdparanoiasrc track=5 ! queue ! audioconvert ! flacenc ! filesink location=track5.flac
Rip track 5 of an audio CD and encode it losslessly to a FLAC file
Hierarchy
GObject ╰──GInitiallyUnowned ╰──GstObject ╰──GstElement ╰──GstAudioEncoder ╰──flacenc
Implemented interfaces
Factory details
Authors: – Wim Taymans
Classification: – Codec/Encoder/Audio
Rank – primary
Plugin – flac
Package – GStreamer Good Plug-ins
Pad Templates
sink
audio/x-raw:
format: { S8, S16LE, S24LE, S24_32LE }
layout: interleaved
rate: [ 1, 655350 ]
channels: 1
audio/x-raw:
format: { S8, S16LE, S24LE, S24_32LE }
layout: interleaved
rate: [ 1, 655350 ]
channels: 2
channel-mask: 0x0000000000000003
audio/x-raw:
format: { S8, S16LE, S24LE, S24_32LE }
layout: interleaved
rate: [ 1, 655350 ]
channels: 3
channel-mask: 0x0000000000000007
audio/x-raw:
format: { S8, S16LE, S24LE, S24_32LE }
layout: interleaved
rate: [ 1, 655350 ]
channels: 4
channel-mask: 0x0000000000000033
audio/x-raw:
format: { S8, S16LE, S24LE, S24_32LE }
layout: interleaved
rate: [ 1, 655350 ]
channels: 5
channel-mask: 0x0000000000000037
audio/x-raw:
format: { S8, S16LE, S24LE, S24_32LE }
layout: interleaved
rate: [ 1, 655350 ]
channels: 6
channel-mask: 0x000000000000003f
audio/x-raw:
format: { S8, S16LE, S24LE, S24_32LE }
layout: interleaved
rate: [ 1, 655350 ]
channels: 7
channel-mask: 0x000000000000013f
audio/x-raw:
format: { S8, S16LE, S24LE, S24_32LE }
layout: interleaved
rate: [ 1, 655350 ]
channels: 8
channel-mask: 0x0000000000000c3f
Properties
blocksize
“blocksize” guint
Blocksize in samples
Flags : Read / Write / Construct
Default value : 4608
escape-coding
“escape-coding” gboolean
search for escape codes in the entropy coding stage for slightly better compression
Flags : Read / Write / Construct
Default value : false
exhaustive-model-search
“exhaustive-model-search” gboolean
do exhaustive search of LP coefficient quantization (expensive!)
Flags : Read / Write / Construct
Default value : false
loose-mid-side-stereo
“loose-mid-side-stereo” gboolean
Loose mid side stereo
Flags : Read / Write / Construct
Default value : false
max-lpc-order
“max-lpc-order” guint
Max LPC order; 0 => use only fixed predictors
Flags : Read / Write / Construct
Default value : 8
max-residual-partition-order
“max-residual-partition-order” guint
Max residual partition order (above 4 doesn't usually help much)
Flags : Read / Write / Construct
Default value : 3
mid-side-stereo
“mid-side-stereo” gboolean
Do mid side stereo (only for stereo input)
Flags : Read / Write / Construct
Default value : true
min-residual-partition-order
“min-residual-partition-order” guint
Min residual partition order (above 4 doesn't usually help much)
Flags : Read / Write / Construct
Default value : 3
padding
“padding” guint
Write a PADDING block with this length in bytes
Flags : Read / Write / Construct
Default value : 0
qlp-coeff-prec-search
“qlp-coeff-prec-search” gboolean
false = use qlp_coeff_precision, true = search around qlp_coeff_precision, take best
Flags : Read / Write / Construct
Default value : false
qlp-coeff-precision
“qlp-coeff-precision” guint
Precision in bits of quantized linear-predictor coefficients; 0 = automatic
Flags : Read / Write / Construct
Default value : 0
quality
“quality” Flac-enc-quality *
Speed versus compression tradeoff
Flags : Read / Write / Construct
Default value : 5 (5)
rice-parameter-search-dist
“rice-parameter-search-dist” guint
0 = try only calc'd parameter k; else try all [k-dist..k+dist] parameters, use best
Flags : Read / Write / Construct
Default value : 0
seekpoints
“seekpoints” gint
Add SEEKTABLE metadata (if > 0, number of entries, if < 0, interval in sec)
Flags : Read / Write / Construct
Default value : -10
streamable-subset
“streamable-subset” gboolean
true to limit encoder to generating a Subset stream, else false
Flags : Read / Write / Construct
Default value : true
Named constants
Flac-enc-quality
Members
0
(0) – 0 - Fastest compression
1
(1) – 1
2
(2) – 2
3
(3) – 3
4
(4) – 4
5
(5) – 5 - Default
6
(6) – 6
7
(7) – 7
8
(8) – 8 - Highest compression
9
(9) – 9 - Insane
The results of the search are